**Frenzy**

At the start of the Charge Phase, each of your non-Fleeing units with at least one model with Frenzy that

(Rule is too long, Click for complete rule)

21.A.a.12

At the start of the Charge Phase, each of your non-Fleeing units with at least one model with Frenzy that~~could declare a Charge against~~ is unengaged, does not contain any Shaken models, and has an enemy unit inside its Front Arc within the unit’s Advance Rate +7” must take a Discipline Test, called a Frenzy Test. If the test is failed, the whole unit must declare a Charge this Player Turn if possible.

Frenzy Tests and Restrain Pursuit Tests taken by units with at least one model with Frenzy are subject to Maximised

Roll .

If there are different Advance Rates available in the unit, the Advance Rate used for the Frenzy Test and for the

Charge Range is determined as follows:

• If a model has more than one Advance Rate (e.g. due to Fly ), the model must use the Advance Rate that has the

highest chance of completing the Charge.

• If a unit contains models with different Advance Rates, the unit must use the highest Advance Rate that all

models in the unit can use (which will usually be the lowest Advance Rate in the unit).

For example, a model with Advance Rate 2″ and Fly (8″, 16″) must use the Advance Rate from Fly. And if a Character

in a Combined Unit has Advance Rate 4″ while the R&F models have 6″, the Combined Unit must use Advance Rate 4″.

Note that when a unit is forced to declare a Charge due to a failed Frenzy Test, it is not forced to Charge the enemy

unit that triggered the Frenzy Test.

UPDATED TO ERRATA VERSION 9

**Frenzy**At the start of the Charge Phase, each of your non-Fleeing units with at least one model with Frenzy that

Frenzy Tests and Restrain Pursuit Tests taken by units with at least one model with Frenzy are subject to Maximised

Roll .

If there are different Advance Rates available in the unit, the Advance Rate used for the Frenzy Test and for the

Charge Range is determined as follows:

• If a model has more than one Advance Rate (e.g. due to Fly ), the model must use the Advance Rate that has the

highest chance of completing the Charge.

• If a unit contains models with different Advance Rates, the unit must use the highest Advance Rate that all

models in the unit can use (which will usually be the lowest Advance Rate in the unit).

For example, a model with Advance Rate 2″ and Fly (8″, 16″) must use the Advance Rate from Fly. And if a Character

in a Combined Unit has Advance Rate 4″ while the R&F models have 6″, the Combined Unit must use Advance Rate 4″.

Note that when a unit is forced to declare a Charge due to a failed Frenzy Test, it is not forced to Charge the enemy

unit that triggered the Frenzy Test.

UPDATED TO ERRATA VERSION 9

10,967 times viewed